eMachines G630 Service Guide - Page 86
Removing the LCD Bezel
View all eMachines G630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Removing the LCD Bezel 1. See "Removing the LCD Module" on page 53. 2. Remove the two (2) upper and two (2) lower bezel screw caps and screws. Step LCD Bezel Size M2.5*6 Quantity 4 Screw Type 3. Starting from the bottom edge of the bezel, pry the bezel upwards and away from the panel. Work along the right side toward the top of the bezel, prying the covers apart. Continue along the top edge and down the left side to remove the bezel. NOTE: If necessary, use a pry to lift up the outside edges of the bezel. 76 Chapter 3
76
Chapter 3
Removing the LCD Bezel
1.
See “Removing the LCD Module” on page 53.
2.
Remove the two (2) upper and two (2) lower bezel screw caps and screws.
3.
Starting from the bottom edge of the bezel, pry the bezel upwards and away from the panel. Work along the
right side toward the top of the bezel, prying the covers apart. Continue along the top edge and down the left
side to remove the bezel.
NOTE:
If necessary, use a pry to lift up the outside edges of the bezel.
Step
Size
Quantity
Screw Type
LCD Bezel
M2.5*6
4