eMachines T3304 NG3 Hardware Reference - Page 82
Using a second monitor - drivers download
View all eMachines T3304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
www.emachines.com Using a second monitor Using a second monitor Important The dialog boxes shown in this section are examples only and may not represent the actual screens on your computer. Tips & Tricks For the location of the VGA port on your computer, see the setup poster or "Back" on page 10. If your computer's video card supports it (it must have two video connections), you can connect an additional monitor or projector to your computer. To use a projector or additional monitor: 1 Turn off your computer. 2 Plug the projector or monitor cable into the secondary VGA port on your computer. 3 Turn on your computer. 4 Plug the projector or monitor power cord into an AC power outlet, then turn it on. Windows recognizes the new hardware and searches for its driver. You may need to install the driver from the disc supplied by the manufacturer or download the driver from the manufacturer's Web site. 5 After the driver is installed, right-click any empty space on the desktop, then click Properties. The Display Properties dialog box opens. 6 Click the Settings tab. 7 Right-click the second monitor icon (labeled 2), then click Attached. 8 Click Apply. 9 Adjust properties such as Screen Resolution or Color Quality if necessary. 10 Click OK. 75