eMachines T6003 NG3 Hardware Reference - Page 164
Closing the case, Replacing the front bezel, Replacing the side panel
View all eMachines T6003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
www.emachines.com Closing the case Closing the case Replacing the front bezel To replace the front bezel: 1 If you disconnected the bezel cables when you removed the bezel, reconnect them to the system board. 2 Align the latch pins on the bezel with the computer latch holes. 3 Press the bezel firmly into place. Replacing the side panel To replace the side panel: 1 Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case. 2 Align the side panel, then slide the side panel toward the front of the computer to secure it into place. 3 Replace the side panel thumbscrews. 4 Reconnect the cables and power cord. 157
Closing the case
www.emachines.com
157
Closing the case
Replacing the front bezel
To replace the front bezel:
1
If you disconnected the bezel cables when you removed the bezel,
reconnect them to the system board.
2
Align the latch pins on the bezel with the computer latch holes.
3
Press the bezel firmly into place.
Replacing the side panel
To replace the side panel:
1
Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2
Align the side panel, then slide the side panel toward the front of the
computer to secure it into place.
3
Replace the side panel thumbscrews.
4
Reconnect the cables and power cord.