eMachines W2040 User Guide - Page 25
Replacing the Cover
View all eMachines W2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Replacing the Cover Follow these steps to replace the cover: 1. Hold the cover with your hands and gently put it down to the chassis on the rear position (about 1cm) from the front bezel, then push it to the front. 2. Tighten the cover to the chassis with the screws you removed. 3. Reconnect the monitor, keyboard, mouse, and any other peripheral device's cable connectors to your system. Installing and Removing Drives 4-3
4-3
Installing and Removing Drives
Follow these steps to replace the cover:
1.
Hold the cover with your hands and gently put it down to the chassis on the rear position
(about 1cm) from the front bezel, then push it to the front.
2.
Tighten the cover to the chassis with the screws you removed.
3.
Reconnect the monitor, keyboard, mouse, and any other peripheral device’s cable connectors
to your system.
Replacing the Cover
±