iRobot Scooba 230 Product Manual - Page 11
Instructions for Use - bottom plate
View all iRobot Scooba 230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Instructions for Use Before using your Scooba for the first time, you must: Insert the included battery into Scooba Plug in and charge Scooba overnight for the first charge. Your charger will flash twice when plugged in to show that it has power. Your Scooba battery is fully charged when the light on the charger is solid green. Place Scooba on storage mat to protect bottom plate brushes. Ensure charger jack door is closed when using Scooba. Using Your Scooba These steps will guide you through setting up and cleaning the floor with your Scooba 1 Slowly add warm water into FILL port. Open both FILL and EMPTY ports so bladder can fully expand. (Do not use hot water.) 2 Add Scooba Hard Floor Cleaner. (1 packet or ½ capful) 3 Firmly close FILL and EMPTY ports until sealed 4 Place Scooba in the middle of the dirtiest area on the floor. 5 Press power button to turn on Scooba. 6 Press and release clean button to begin the full cleaning cycle. For short cycle, press and hold until second song starts. Emptying and Cleaning Your Scooba 1 Empty and thoroughly rinse both tanks with water. 2 Remove bottom plate. Rinse and remove all debris from brushes and squeegee. 3 Clear any debris on robot before replacing bottom plate. If necessary, remove and replace tires. www.irobot.com 11