iRobot Verro 100 Product Manual - Page 17
Cleaning the Impeller
View all iRobot Verro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Maintenance and Adjustment (cont...) Cleaning the Impeller Verro uses an impeller to pump water up through the vacuum intakes at the bottom of the robot and out the jet valve housing at the top. If this impeller becomes fouled by hair, string, etc. it will reduce the amount of water Verro can pump and may reduce the life of the motor. If you notice that Verro is not cleaning well or that it is having difficulty moving around the pool, and other measures (cleaning the filter bag, checking the vacuum intakes, etc.) have not corrected the problem, check the impeller. 1 Unplug the Power Supply. (Please keep the plug away from contact with water.) Unplug the floating power cord from the Power Supply. 2 Remove the screws that attach the jet valve ports. (See Jet Valve Housing Assembly illustration on page 7.) 3 Remove the jet valve port. 4 Inspect the impeller, especially at the bottom, for hair, string, etc. 5 If the impeller is fouled, bend a large paper clip as shown. www.irobot.com 17