1994 Buick LeSabre Owner's Manual - Page 139

Clock To set the clock, 0 indicates which side of the tape is being played. When the end of the tape is reached, it will automatically reverse and play the other side of the tape. Press the SET button. Within 5 seconds, press and hold SCAN until the correct hour appears on the display. Press and hold SEEK 4 or appears on the display. until the correct minute Program To go from one sideof the tape to the other, press the PROG button. This button will also stop REV, FWD, PREV, or NEXT and play the tape. Cr02 This button sets the tape bias. When playing high bias chrome or metal tapes labeled Cr02, press the button to turn on the CrO2. Cr02will appear in the display. When playing standard bias tapes, press again to turn off the Cr02. To Adjust theTone BASS adjusts thebass response up or down. TREB adjusts the treble response up or down. If the station is weak or noisy, adjust the treble down to reduce the noise. To Play a Cassette Your tape player is built to work best with tapes that are 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player. With the radio on,press a tape into the slot marked AUTO REVERSE (tape sidegoes in first). Once the tape is playing, use the upper and lower knobs for volume, balance, and fade justas you did for radio. The arrow in the graphic display above the word TAPE Reverse To reverse the tape, press REV and the tape will rapidly reverse to the beginning or until you press the PROG or REV button again. The radio will play during reverse. r orward To advance thetape, press FWD and the tape will rapidly go forward to theend of the tape or until you press the PROG or FWD button again. Theradio will play during forward. 137