1996 Buick Riviera Owner's Manual - Page 263

The left low-beam headlamp access area is behind and between the high beam area and the air cleaner. 4. Remove the filter, 5. Slide the air cleaner assembly towardthe engine to disengage 'and remove it. To reinstall the air cleaner assembly, slide base the sections into their former positions. Install the filter and replace the cover. Reattach the electrical connector and air duct,and tighten,the clamp. Turn the bulb socket one-quarter turn toward the centerof the engine compartment, while pressing it firmly. Remove the wire connector from the bulb lifting the by lock tab and pulling it away from the plastic base. If more h a d clearance is required, remove the air cleaner assembly as follows: 1. Remove the air duct clampand separate the duct from the air cleaner cover. 2. Remove the air cleaner cover and detach the electrical.connector. 3.. Tilt and pull the cover toward the engine to disengage it from the assembly. TOreassemble, attach the wire connector to the (A) plastic basemaking sure the lock tab (B) is over the lock (C). Install the bulb putting the small tab by (D) into the small notchin the lamp(E). Tm!n the bulb socket one-quarter turn making sure the tab properly is engaged inthe panel slot. 6-34