2002 Buick Rendezvous Owner's Manual - Page 385

Front Turn Signal/Parking/Sidemarker Lamps To replace the front turn signal, parking or sidemarker lamp bulbs, follow the headlamp bulb replacement procedure and replace the appropriate bulb. 7. Pull the bulb assembly out from the lamp housing. 8. Unhook the electrical connector by lifting up the tabs and separate the connector from the bulb base. 9. Install the new bulb into the electrical connector. Push the bulb firmly enough so that the tabs hook over the tab on the bulb. 10. Carefully put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn counterclockwise. 11. Replace the applique on the liftgate. 12. Gently lift the liftgate. 13. Reinstall the seven wing nuts and the four outboard nuts. 14. Reinstall the panel inside the liftgate by connecting the tabs. 15. Close the liftgate. Taillamps and Back-Up Lamps (Liftgate Mounted) 1. Open the liftgate. 2. Remove the panel inside the liftgate by lifting the tabs and pulling the panel off. 3. Remove the seven wing nuts and the four outboard nuts (two at each end). 4. Gently lower the liftgate. 5. Pull the lamp applique directly rearward from the vehicle. 6. Turn the bulb socket one-quarter of a turn clockwise. 6-38