2015 Buick LaCrosse Owner Manual - Page 285

10-32 Vehicle Care To replace one of these bulbs: 1. Open the hood. See Hood on page 10-5. 2. If replacing a headlamp bulb, remove the dust cover from the back of the headlamp housing by turning counterclockwise one-quarter turn. 3. If replacing a turn signal lamp bulb on a non-eAssist vehicle, remove the close out panel push pins and close out panel covering the bulb socket. 4. Remove the bulb socket from the headlamp by turning counterclockwise one-quarter turn. 5. Remove the bulb from the socket. If replacing the high/ low-beam bulb, pry the two clips on either end of the bulb and pull straight out. 6. Reverse Steps 1-5 to install. Headlamps, Front Turn Signal and Parking Lamps Base Headlamp Assembly The base model vehicle has a halogen high/low-beam headlamp, parking lamp, and a turn signal lamp on the headlamp assembly. For replacement of the turn signal lamp bulb on an eAssist vehicle, contact your dealer. Uplevel Headlamp Assembly The uplevel model vehicle has a high intensity discharge (HID) high/ low beam, DRL/parking lamp, and a turn signal lamp on the headlamp assembly. See High Intensity Discharge (HID) Lighting on page 10-31. To replace one of these bulbs: 1. Open the hood. See Hood on page 10-5. 2. Turn the bulb socket counterclockwise to remove it from the headlamp assembly. 1. Headlamp 2. Turn Signal Lamp