2001 Cadillac Eldorado Owner's Manual - Page 95

Turn and Lane Change Signals To signal a turn, move the lever all the way up or down. The lever returns automatically when the turn is complete. An arrow located on the instrument panel cluster will flash in the direction of the turn or lane change. Arrows that flash rapidly when signaling for a turn or lane change may be caused by a burned-out signal bulb. Other drivers won't see the turn signal. Replace burned-out bulbs to help avoid possible accidents. Check the fuse (see "Fuses and Circuit Breakers" in the Index) and for burned-out bulbs if the arrow fails to work when signaling a turn. Headlamp High/Low Beam Changer This light located on the instrument panel panel will be on when the high beam headlamps are in use. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. The lever returns when it's released. If the turn signal is left on, a warning chime will sound and the Driver Information Center (DIC) will display TURN SIGNAL ON (after driving about 1 mile (1.6 km/h)) to remind you to turn it off. Pull the turn signal lever all the way toward you and then release it to change the headlamps from low beam to high or from high beam to low. 2-34