2002 Cadillac Escalade Owner's Manual - Page 126

When you operate the rear window defogger, it also warms both outside mirrors to help clear them of fog or ice. See "Rear Window Defogger" in the Index for more information. The mirrors can also be programmed for personalization. For more information, see "Memory Seat and Mirrors" and "Secondary Information Center" in the Index. If further adjustment is needed after the mirror is tilted, the mirror controls may be used. You can also adjust the angle of tilt for each outside mirror by doing the following: 1. Place the vehicle in REVERSE (R) and allow the mirrors to tilt (be sure this feature is enabled in the SIC). 2. Change the angle of mirror tilt to your liking with the mirror controls. The mirrors are now set to the desired position. This feature can also be disabled/configured through the SIC. See "Secondary Information Center" in the Index for more information. Curb View Assist Mirror For this function to work, it must be enabled in the SIC. See "Secondary Information Center" in the Index for more information. Your vehicle is equipped with the curb view assist mirror feature. When the vehicle is shifted into REVERSE (R) there will be a three second delay before the curb view assist mirror(s) tilt to a preselected position. This feature may be useful in allowing you to view the curb when you are parallel parking. When the vehicle is shifted out of REVERSE (R) and a five second delay has occurred, the selected mirrors will return to the original position. Driver's Outside Auto-Dimming Rearview Mirror The driver's outside mirror will adjust for the glare of any headlamps behind you. This feature is controlled by the on and off settings on the electrochromic mirror. See "Electrochromic Day/Night Rearview Mirror with Compass and Temperature" earlier in this section. 2-47