2002 Cadillac Escalade Owner's Manual - Page 348

Taillamps A. Turn Signal-Tail Lamp B. Stop-Tail Lamp C. Back-Up Lamp D. Sidemarker Lamp 2. Remove the lamp assembly. 3. Press the release tab and turn the bulb socket counterclockwise to remove it from the taillamp housing. (The sidemarker lamp does not have a release tab.) 4. Pull the bulb straight out from the socket. 1. Use a screwdriver to remove the two screws from the lamp assembly. 5. Press a new bulb into the socket, insert it into the taillamp housing and turn the socket clockwise into the taillamp housing until it clicks. (The sidemarker lamp does not have a release tab and therefore will not click when it is installed.) 6. Reinstall the rear lamp assembly and tighten the screws. 6-47