2002 Cadillac Escalade Owner's Manual - Page 17

In addition, you can also store the seat exit position for driver 1 and driver 2. See "Memory Seat Exit" later in this section for more information. The memory function does not store the lumbar or the side wing positions. To store your memory seat and mirror positions, do the following: 1. Adjust the driver's seat and both outside mirrors to your desired position. 2. Press and hold the 1 or 2 (driver 1 or 2) button of the memory control for three seconds. When you hear a chime ring two times, the memory positions are stored. To do the same thing for a second driver, follow the preceding steps, but press the other number of the memory control. The memory recall feature only works when the transmission is in PARK (P). To recall memory seat and mirror positions, make sure your vehicle is in PARK (P), then press the 1 or 2 button of the memory control to recall the seat setting. You will hear a chime ring one time to let you know the setting has been selected. The memory seat and mirror positions can also be programmed to work with the keyless entry system. See "Secondary Information Center" in the Index for more information. Memory Seat Exit For this function to work, it must be enabled in the secondary information center. See "Secondary Information Center" in the Index for more information. By moving the seats to a stored exit position, the memory seat exit feature can make it easier to leave the vehicle. To store the seat exit position for driver 1 or driver 2, do the following: 1. Select the desired driver number by pressing the 1 or 2 button. 2. Move the seat to the desired position. 3. Press and hold the Exit button of the memory control for three seconds. When you hear a chime ring two times, the exit position is stored for the identified driver (driver 1 or 2). To use the exit feature, press the Exit button on the memory seat controls. If you have the exit feature enabled in the secondary information center, then removing the key from the ignition will cause the seat to move to the preset exit position without having to press the Exit button. See "Secondary Information Center" in the Index for more information. 1-5