2004 Cadillac XLR Owner's Manual - Page 119

Flash-to-Pass This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use. When you do, the following will occur: Use the lever located on the right side of the steering column to operate the windshield wipers. 1(High Speed): Move the lever to this position for steady wiping at high speed. • If the low-beam headlamps are on, the high-beam headlamps will turn on. They'll stay on as long as you hold the lever there. Release the lever to turn them off. 6(Low Speed): Move the lever to this position for steady wiping at low speed. &(Delay): 9(Off): Move the lever to this position to activate the Rainsense™ function. Adjustments in this region change the sensitivity of the Rainsense™ system. • If the headlamps are on high-beam, they will switch to low-beam. To return to high beam, push the lever away from you. Windshield Wipers Move the lever to this position to turn off the windshield wipers. Move the lever all the way down to mist and release for a single wiping cycle. The windshield wipers will stop after one wipe. If you want more wipes, hold the band on mist longer. Heavy snow or ice can overload the wipers. If this occurs, a circuit breaker will stop the wipers until the motor cools. So, be sure to clear any ice and snow from the windshield wiper blades before using them. If the wiper blades are frozen to the windshield, carefully loosen them or warm the windshield before turning the wipers on. If your blades do become worn or damaged, get new blades or blade inserts. 8(Mist): 3-9