2010 Cadillac CTS Owner's Manual - Page 109

Storage 10. Move the levers on both crossrail supports to the down position. Slide the crossrail assembly back and forth until the crossrail pin engages. 11. Push back and forth again to make sure the pins have engaged into the slots. Make sure both crossrails are locked into the same hole position on each side of the vehicle. 3-9 Removing the Crossrails 1. Start with either crossrail assembly, slide both levers into the upper most position, moving the lever from the rear to the front of the vehicle. 2. Slide the crossrail assembly until it is in the cut-out area or the siderail channel. 3. Remove the crossrail from the vehicle. 4. Repeat steps 1-3 for the other crossrail assembly. 5. Reinstall the siderail covers making sure they are fully seated in the siderail channel. 9. Levers must still be in the forward up position. For front crossbar, slide the crossrail assembly (A) forward until the crossrail end is past the channel cut-out area (B). For rear crossbar, slide the crossrail assembly (A) rearward until the entire crossrail support is in first position to the rear of the channel cut-out area (B).