2010 Cadillac CTS Owner's Manual - Page 339
2010 Cadillac CTS Manual
Page 339 highlights
Vehicle Care 9-39 License Plate Lamp (Wagon) To replace one of these bulbs: 1. Open the liftgate. See Liftgate (Wagon) on page 1‑19 for more information. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly. 7. Turn the lamp assembly into the liftgate engaging the clip side first. 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. A. Bulb Socket B. Bulb C. Lamp Assembly 4. Turn the bulb socket (A) counterclockwise to remove from lamp assembly (C). Fog Lamp (Up Level Only) License Plate Lamp Replacement Bulbs Exterior Lamp Bulb Number H11LL W5WLL Passenger side shown, driver side similar 2. Push the left end of the lamp assembly towards the right. 3. Turn the lamp assembly down to remove from liftgate. 5. Pull the bulb (B) straight out of the bulb socket. For replacement bulbs not listed here, contact your dealer/retailer.