2010 Cadillac CTS Owner's Manual - Page 168

4-58 Instruments and Controls Easy Exit Setup If the vehicle has this feature, it allows you to select which areas will recall with the automatic easy exit seat feature. The remote memory recall feature is unaffected by this selection. It also allows you to turn off the automatic easy exit feature. See the "Memory Seat" information under Power Seat Adjustment on page 2‑4 and "Easy Exit Recall" earlier for more information. Press the customization button until Easy Exit Setup appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/ down button to scroll through the following settings: Off: No automatic seat exit will recall. Tilt/Telescope: The steering wheel tilt and steering column telescope features will recall. All (default): The driver's seat and the steering wheel tilt and steering column telescope features will recall, if the vehicle has this option. No Change: No change will be made to this feature. The current setting will remain. To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. The automatic easy exit seat movement will only occur one time after the key is removed from the ignition. If the automatic movement has already occurred, and you put the key back in the ignition and remove it again, the seat and steering column will stay in the original exit position, unless a memory recall took place prior to removing the key again. Also, the driver's seat, outside mirrors and steering wheel will automatically move to the stored driving position when the unlock button on the Remote Keyless Entry (RKE) transmitter is pressed. The steering column will also move on vehicles with the power tilt and telescopic steering feature. No Change: No change will be made to this feature. The current setting will remain. To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. Exiting the Feature Settings Menu The feature settings menu will be exited when any of the following occurs: . The vehicle is no longer in ON/RUN. The trip/fuel or vehicle information DIC buttons are pressed. The end of the feature settings menu is reached and exited. A 40 second time period has elapsed with no selection made. . . .