2010 Cadillac CTS Owner's Manual - Page 224

6-40 Infotainment System Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press and hold two seconds: . 3. Say "Change phone". The system responds with "Please wait while I search for other phones". . 3. Say the complete phone number to be stored at once with no pauses. . If another phone is found, the response will be " is now connected". If another phone is not found, the original phone remains connected. b g for . If the system recognizes the number it responds with "OK, Storing" and repeats the phone number. If the system is unsure it recognizes the phone number, it responds with "Store" and repeats the number followed by "Please say yes or no". If the number is correct, say "Yes". If the number is not correct, say "No". The system will ask for the number to be re-entered. . For vehicles without a navigation system, the system responds with "Ready" followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say "Hands Free". The system responds with "Ready" followed by a tone. Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve phone numbers: ... . Store Digit Store Directory 2. Say "Store". The system responds with "Store, number please" followed by a tone. 4. After the system stores the phone number, it responds with "Please say the name tag" followed by a tone.