2010 Cadillac CTS Owner's Manual - Page 229

Infotainment System 3. Say the name tag of the person to call. . 6-45 Using the Re-dial Command 1. Press and hold two seconds: . Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . If the system clearly recognizes the name tag it responds with "OK, calling, " and dials the number. If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say "Yes". The system responds with "OK, calling, " and dials the number. If the name tag is not correct, say "No". The system will ask for the name tag to be re-entered. b g for . For vehicles without a navigation system, the system responds with "Ready" followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say "Hands Free". The system responds with "Ready" followed by a tone. Press b g and begin speaking to answer the call. Press . . c ª to ignore a call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. . Once connected, the person called will be heard through the audio speakers. 2. After the tone, say "Re-dial". The system responds with "Re-dial using " and dials the last number called from the connected Bluetooth phone. Once connected, the person called will be heard through the audio speakers. Press b g to answer an incoming call when another call is active. The original call is placed on hold. Press b g again to return to the original call. To ignore the incoming call, continue with the original call with no action. Press c ª to disconnect the current call and switch to the call on hold. . . .