2010 Cadillac CTS Owner's Manual - Page 43

Seats and Restraints A single beep will sound. The seat, outside mirrors, and steering wheel will move to the position previously stored for the identified driver. If the Remote Keyless Entry (RKE) transmitter is used to enter the vehicle and the remote recall memory feature is on, automatic seat and mirror movement occur. On vehicles with the Keyless Access System, automatic adjustment occurs when the driver door is opened. To stop recall movement of the memory feature at any time, press one of the power seat controls, memory buttons, power tilt wheel control, or power mirror buttons. If something has blocked the driver seat or the steering column while recalling a memory position, the recall may stop. Remove the obstruction, then press the appropriate control for the area that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer/retailer for service. 2-5 On vehicles with the Keyless Access System, automatic adjustment occurs when the ignition is turned to OFF and the driver door is opened. A single beep sounds. The driver seat moves back, and if the vehicle has the power tilt wheel and telescopic steering feature, it moves up and forward. See "EASY EXIT RECALL" under Vehicle Personalization on page 4‑51 for more information. For more programming information, see Vehicle Personalization on page 4‑51. Easy Exit Recall S : With the vehicle in P (Park) for an automatic transmission or the parking brake applied for a manual transmission, press the exit button to recall the exit position. If the easy exit seat feature is on in the DIC, automatic seat and power telescopic steering column movement occurs when the key is removed from the ignition.