2011 Cadillac DTS Owner's Manual - Page 136

Compass Compass Operation Press O or AUTO 3, depending on the vehicle, to turn the compass on or off. When the ignition and the compass feature are on, after a few seconds, the mirror will display the compass heading. The compass automatically calibrates as the vehicle is driven. Compass Variance The compass is set to zone eight. If you do not live in zone eight or drive out of the area, the compass variance needs to be changed to the appropriate zone. To adjust for compass variance: 1. Find the current location and variance zone number on the following zone map. Compass Calibration If after a few seconds, the display does not show the correct direction, (for example, N for North), there may be a strong magnetic field interfering with the compass. Interference can be caused by a magnetic antenna mount, magnetic note pad holder or a similar magnetic item. The compass can be placed in calibration mode manually by pressing and holding O or AUTO 3, depending on the vehicle, until a C is shown in the compass display. The compass can be calibrated by driving the vehicle in circles at 5 mph (8 km/h) or less until the display reads a direction. 2. Press and hold O or number displays. 3-34 AUTO 3 until a zone