2011 Cadillac DTS Owner's Manual - Page 266

If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. To hear all of the numbers recognized by the system, say "Verify" at any time. 1. Press and hold 2. Say "Digit Dial." 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." Once connected, the person called will be heard through the audio speakers. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . b g for two seconds. Press b g to answer an incoming call when another call is active. The original call is placed on hold. Press ... b g again to return to the original call. To ignore the incoming call, no action is required. Press c x to disconnect the current call and switch to the call on hold. Using the "Re‐dial" Command 1. Press and hold Three‐Way Calling Three‐way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press 2. Say "Three‐way call." 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press the callers together. b g for two seconds. 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. b g. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... b g to link all b g to answer the call. Press c x to ignore a call. Press Ending a Call Press c x to end a call. 4-108