2011 Cadillac DTS Owner's Manual - Page 78

2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2. 1. Find the top tether anchor. 2. 2. Pull open the top tether anchor cover to expose the anchor. 2. 3. If you have an adjustable headrest or head restraint, raise the headrest or head restraint. 2. 4. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether over the headrest or head restraint. If the position you are using has a fixed or adjustable headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint. If the position you are using has an adjustable headrest or head restraint and you are using a single tether, route the tether under the headrest or head restraint and in between the headrest or head restraint posts. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt 2-46