2015 Cadillac ATS Owner Manual - Page 262

Driving and Operating the next 5 km/h or 5 mph mark on the speedometer, press +RES up to the second detent. SET− (Set/Coast): Press the control down briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed. To decrease speed by 1 km/h (1 mph), press SET− down to the first detent. To decrease speed to the next 5 km/h (5 mph) mark on the speedometer, press SET− down to the second detent. 4. Remove your foot from the accelerator. When the cruise control has been set to the desired speed, the cruise control indicator appears green on the instrument cluster and a cruise set speed message appears on the Head-Up Display (HUD), if equipped. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied or * is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 40 km/h (25 mph) or more, briefly press +RES up to the first detent. The vehicle returns to the previous set speed. 9-39 Increasing Speed While Cruise Control is at a Set Speed If the cruise control system is already activated: . Press and hold +RES up until the desired speed is reached, then release it. To increase vehicle speed in small increments, briefly press +RES up to the first detent. For each press, the vehicle goes about 1 km/h (1 mph) faster. To increase vehicle speed in larger increments, briefly press +RES up to the second detent. For each press, the vehicle speed increases to the next 5 km/h (5 mph) mark on the speedometer. . . * (Cancel): Press to disengage cruise control without erasing the set speed from memory. Setting Cruise Control If J is on when not in use, SET− or +RES could get bumped and go into cruise when not desired. Keep J off when cruise is not being used. 1. Press J. 2. Get up to the desired speed. 3. Press and release SET− . The speedometer reading can be displayed in either English or metric units. See Instrument Cluster on page 5-10. The increment value used depends on the units displayed.