2015 Cadillac ATS Owner Manual - Page 269

9-46 Driving and Operating A DIC warning message may display indicating to shift to P (Park) before exiting the vehicle. See Vehicle Messages on page 5-32. ACC Override If using the accelerator pedal while ACC is active, a DIC warning message will indicate that automatic braking will not occur. See Vehicle Messages on page 5-32. ACC will resume operation when the accelerator pedal is not being pressed. addition, the left and right sides of the Safety Alert Seat will pulse three times, or three beeps will sound. See "Alert Type" and "Go Notifier" in "Collision/Detection Systems" under Vehicle Personalization on page 5-44. When the vehicle ahead drives away, press RES+ or the accelerator pedal to resume ACC. If stopped for more than two minutes or if the driver door is opened and the driver safety belt is unbuckled, the ACC automatically applies the electric parking brake to hold the vehicle. The electric parking brake status light will turn on. See Parking Brake (Electric) on page 9-30 or Parking Brake (Manual) on page 9-32. To resume ACC and release the electric parking brake, press the accelerator pedal. ACC can be resumed when the vehicle is traveling greater than 25 km/h (16 mph). { Warning If ACC has stopped the vehicle, and if ACC is disengaged, turned off, or canceled, the vehicle will no longer be held at a stop. The vehicle can move. When ACC is holding the vehicle at a stop, always be prepared to manually apply the brakes. { Warning The ACC will not automatically apply the brakes if your foot is resting on the accelerator pedal. You could crash into a vehicle ahead of you. Curves in the Road { Warning Leaving the vehicle without placing it in P (Park) can be dangerous. Do not leave the vehicle while it is being held at a stop by ACC. Always place the vehicle in P (Park) and turn off the ignition before leaving the vehicle. { Warning On curves, ACC may not detect a vehicle ahead in your lane. You could be startled if the vehicle (Continued)