1998 Chevrolet Blazer Owner's Manual - Page 308

Taillamps I . Open the endgate. 2. Remove the two screws from the lamp assembly. 7. Put the socket into the lamp assembly and turn the socket tothe right until it locks into place. 8. Install the lamp assembly and screws. 9. Close the endgate. Windshield Wiper Blade Replacement See "Normal Maintenance Replacement Parts" the in Index for the proper type replacement blade. of r;;OTICE: I Use care when removingor installing a blade assembly. Accidental bumping can cause the arm to fall back and strike the windshield. 3. Pull the assembly away from the vehicle. 4. Turn the socket to the left to remove it. Push the tab in while you turn the socketto the left. 1. To remove the old wiperblades, lift the wiper arm until it locks into a vertical position. 5. Holding the base of the bulb, pull the bulb straight out of the socket. 6. Push the new bulb straight into the socket until it clicks. 6-38