1999 Chevrolet Blazer Owner's Manual - Page 322

yellowblue One-Piece Front Turn Signal Lamp Assembly 1. Remove the headlamp assembly as shown under "One-Piece Composite Headlamp System" earlier in this section. 2. Twist the bulb socket to remove it from the headlamp assembly. 5. Turn the bulb assembly counterclockwise to remove it. 6. Put the new bulb assembly into the headlamp assembly and turn it clockwise until it is tight. 7. Plug in the electrical connector. 8. Put the headlamp assembly back into the vehicle. Install the two retaining clips. 3. Pull the bulb straight out to remove it from the socket. 4. Push the new bulb into the socket until it snaps into place. 5. Put the bulb socket into the lamp assembly and turn it clockwise until it is tight. 6. Put the headlamp assembly back into the vehicle. Install the two retaining clips. 6-36