2000 Chevrolet Cavalier Owner's Manual - Page 285

Back-Up Lamps To replace a back-up lamp, do the following: 1. Open the trunk lid and locate the back-up lamp assembly on the trunk lid. 2. Gently remove the bulb from the socket by turning it counterclockwise and pulling it out. 3. Replace the bulb in the socket by aligning the tabs and turning clockwise. Dome Lamp without Integral Reading Lamps To replace a bulb, do the following: 1. From the rear of the dome lamp lens, insert a flat screwdriver between the roof trim and the lens. 2. With the screwdriver, push the tab at the rear of the lens forward to release the lens. 3. Pull the lamp lens rearward to release the two front tabs. 4. Gently remove and replace the bulb(s). 5. Reverse these steps to reinstall the lens. Dome Lamp with Integral Reading Lamps To replace a bulb, do the following: 1. Insert a flat screwdriver into the slot at the rear of the lens. 2. With the screwdriver, push the tab rearward to release the lamp lens. 3. Push the lens forward to release the two tabs at the front of the lens. 4. Gently remove and replace the bulb(s). 5. Reverse these steps to reinstall the lens. 6-39