2002 Chevrolet Venture Owner's Manual - Page 128

Mode 4: Automatic Unlocking with Transaxle in PARK (P) 4. Press LOCK to change the current mode. 5. Press LOCK until you hear the number of chimes corresponding to the mode selection you want. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. D Shift into PARK (P) with the ignition on; all doors will unlock automatically. D Shift out of PARK (P) with the ignition on and the driver's door closed; all doors will lock automatically. Before your vehicle was shipped from the factory, it was programmed in Mode 3. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press LOCK on the power door lock switch. 3. Count the number of chimes you hear. The number of chimes indicates the vehicle's current programmed mode. (If you do not wish to change the current mode, you can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.) Last Door Closed Locking and Lockout Prevention This feature allows you to customize the automatic locking of the doors when exiting the vehicle. Programmable Modes Mode 1: Both Features Off (Doors will always lock immediately when you press LOCK on the power door lock switch or the optional remote keyless entry transmitter.) Mode 2: Lockout Deterrent Only (If you leave your key in the ignition with the driver's door open, you won't be able to lock the doors with the power door locks.) 2-20