2004 Chevrolet Colorado Owner's Manual - Page 15

2. Grasp the loop located on the side of the seatback you want to fold and pull until you hear a click. {CAUTION: A safety belt that is improperly routed, not properly attached, or twisted won't provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. To return the seatback to the upright position, do the following: 1. Lift the seatback up and push it back into place. 2. Reconnect the center safety belt latch plate to the buckle. 3. Make sure the seatback is locked into place by pushing and pulling on it. 4. Repeat Steps 1 and 3 for the other seatback. When the seatback is not in use, it should be kept in the upright, locked position. 3. Fold the seatback down. 4. Repeat Steps 2 and 3 to fold down the other seatback. {CAUTION: If the seatback isn't locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. 1-9