2004 Chevrolet Venture Owner's Manual - Page 213

Directing the Airflow To direct the airflow to the rear-seating area, use the right knob located on the main climate-control panel. Setting the Temperature If the driver is adjusting the temperature, do the following: To increase or decrease the temperature for the entire vehicle, use the temperature controls located on the main climate-control panel. If using the main climate-control panel, then the air-conditioning system must be on to direct cooled air to the rear of the vehicle. If it is not on, then the temperature in the rear of the vehicle will remain at cabin temperature. If a rear-seat passenger is adjusting the temperature, do the following: Press the TEMP button on the rear control panel. Use the left arrow button to make the air cooler. Use the right arrow button to make the air warmer. • Select vent or bi-level mode to direct air to the rear of the vehicle through the overhead outlets. • Select floor, defog or defrost mode to direct air to the rear of the vehicle through the floor outlets. Generally the upper outlets are used for air conditioning and the floor outlets are used for heating. Selecting the Fan Speed If the driver is adjusting the fan speed, use the following control: 9 (Fan): Turn the fan knob on the rear fan control located below the main climate-control system on the switchbank to numeral 1, 2, or 3 to increase or decrease airflow to the rear-seating area. Turn the fan knob on the rear fan control to 0 to turn off the fan. If a rear-seat passenger is adjusting the fan speed, use the following control: FAN: Press the FAN button on the rear control panel. The display will show the current setting. Press the left and right arrow buttons to cycle through the available settings: OFF, LOW, MED and HIGH. Rear Air Outlets To increase airflow through the rear floor outlets, place the left bucket seat in the second row in the forward position. For more information, see Rear Seat Operation on page 1-6. 3-33