2007 Chevrolet Avalanche Owner's Manual - Page 164
2007 Chevrolet Avalanche Manual
Page 164 highlights
5. Immediately release the button when the garage door moves. The indicator light will blink rapidly until programming is complete. 6. Press and release the button again. The garage door should move, confirming that programming is successful and complete. To program another device such as an additional garage door opener, a security device, or home lighting, repeat Steps 1 through 6, choosing a different function button in Step 4 than what you used for the garage door opener. Using Universal Home Remote 3. Go to the garage. Locate the garage door motor head and press and release the "learn" button. After pressing the "learn" button, you have 10 to 30 seconds to complete Step 4 depending on your garage control unit. If you cannot locate the "learn" button, refer to the owners guide for your garage door opener. 4. Press and hold the button you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from five to 20 seconds. 164 Press and hold the appropriate button for at least half of a second. The indicator light will come on while the signal is being transmitted. Reprogramming Universal Home Remote Buttons You can reprogram any of the three buttons by repeating the instructions.