2008 Chevrolet Impala Owner's Manual - Page 191

Setting the Time Without Date Display AM/FM Base Radio with a Single CD Player This type of radio has a H (clock) button for setting the time. You can set the time by following these steps: 1. Press the H button until the hour begins flashing on display. Press this button a second time and the minutes begin flashing on display. 2. While either the hour or the minutes are flashing, turn the f (tune) knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK arrows, \FWD (forward), or sREV (reverse) buttons to adjust the time. 3. Press the H button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set. To change the time default setting from 12 hour to 24 hour, press the H button and then the pushbutton located under the forward arrow label. Once the times 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the H button again to apply the selected default, or let the screen time out. With Date Display Single CD (MP3) Player This type of radio has a time and date. H (clock) button for setting the To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the H button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays. 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, increases by one. • Another way to increase the time or date, is to press the right SEEK arrow or \FWD button. • To decrease, press the left SEEK arrow or sREV button. You can also turn the f (tune) knob, located on the upper right side of the radio, to adjust the selected setting. 3-67