2011 Chevrolet Silverado 2500 HD Extended Cab Owner's Manual - Page 355
2011 Chevrolet Silverado 2500 HD Extended Cab Manual
Page 355 highlights
Driving and Operating Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 40 km/h (25 mph) or more, press the +RES button on the steering wheel. The vehicle returns to the previous set speed and stays there. Increasing Speed While Using Cruise Control If the cruise control system is already activated, . 9-71 Reducing Speed While Using Cruise Control If the cruise control system is already activated, . Press and hold the SET- button on the steering wheel until the desired lower speed is reached, then release it. To slow down in small amounts, press the SET- button on the steering wheel briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower. you might have to step on the accelerator pedal to maintain the vehicle speed. While going downhill, you might have to brake or shift to a lower gear to keep the vehicle speed down. When the brakes are applied the cruise control is disengaged. Ending Cruise Control There are three ways to end cruise control: . . To disengage cruise control; step lightly on the brake pedal. Press Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed. Using Cruise Control on Hills How well the cruise control will work on hills depends upon the vehicle speed, load, and the steepness of the hills. While going up steep hills, . . [ on the steering wheel. Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. To increase vehicle speed in small amounts, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster. To turn off the cruise control, press I on the steering wheel. Erasing Speed Memory The cruise control set speed is erased from memory by pressing the I button or if the ignition is turned off. .