2012 Chevrolet Corvette Owner's Manual - Page 72

3-6 Seats and Restraints To recall, press and release B. The vehicle must be in P (Park) for an automatic transmission or the parking brake must be set for a manual transmission. A single beep sounds. The seat and telescopic steering column will move to the position previously stored for the identified driver. If the easy exit seat feature is programmed on in the vehicle personalization menu, automatic recall occurs when one of the following conditions is met: . Easy Exit Driver Seat This feature can move the seat rearward and the telescopic steering column, if equipped, out of the way to allow extra room to exit the vehicle. B (Easy Exit Driver Seat): To save into memory: Press to save and recall the easy exit seat position. 1. Recall the desired driving position by pressing "1." 2. Adjust the seat and the telescopic steering column to the desired exit position. 3. Press and hold B until two beeps sound. If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service. See Vehicle Personalization on page 5‑54. The vehicle is turned off, in Retained Accessory Power (RAP) or accessory mode, and the driver door is opened. The vehicle is turned off, or in RAP, and the unlock button on the RKE transmitter is pressed. 4. Repeat for a second driver position using "2." .