2013 Chevrolet Corvette Owner Manual - Page 253
2013 Chevrolet Corvette Manual
Page 253 highlights
Driving and Operating Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed. Using Cruise Control on Hills How well the cruise control works on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might want to step on the accelerator pedal to maintain the vehicle speed. When going downhill, you might have to brake or shift to a lower gear to keep the vehicle's speed down. When the brakes are applied the cruise control is disengaged. Cruise Control in Sport and Manual Paddle Shift Gear Selection When the vehicle is in S (Sport) and the manual paddle shift controls are not being used, cruise control operates in the same manner as D (Drive). When the vehicle is in S (Sport) and the manual paddle shift controls are being used, cruise control operates as follows: . 9-43 control is active with a manual paddle shift gear selection, the driver must select the proper gear for the terrain or select D (Drive) on the gear range selector for full automatic transmission operation. Ending Cruise Control . If cruise control is active and a gear is selected with the manual paddle shift controls, the vehicle speed is maintained in the driver selected gear and will not automatically up-shift or down-shift the transmission while the driver 's gear selection is active. If driving in hilly terrain, cruise control may not be able to maintain vehicle speed if an up-shift or down-shift is not selected by the driver. While driving on hilly terrain and cruise To disengage cruise control, step lightly on the brake pedal. If the vehicle has a manual transmission, lightly tap the clutch to end the cruise control session. To turn off the cruise control system, move the cruise control switch to 9. . . When cruise control is disengaged, the CRUISE DISENGAGED message displays on the Driver Information Center (DIC). See Cruise Control Messages on page 5‑36.