2014 Chevrolet Camaro Owner Manual - Page 135

Instruments and Controls Care of the HUD Clean the inside of the windshield as needed to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it. 5-33 If You Cannot See the HUD Image When the Ignition Is On Check that: . Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on your vehicle content. Nothing Is covering the HUD lens. HUD brightness is not too dim or too bright. HUD is adjusted to the proper height. Polarized sunglasses are not worn. Windshield and HUD lens are clean. . . . . If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement on page 10-36.