2014 Chevrolet Silverado 1500 Regular Cab Owner Manual - Page 111

Seats and Restraints Regular Cab Models 1. For models without a rear seat, forward-facing child restraints should only be installed in the right front seating position with safety belts and a top tether. See Securing Child Restraints (Center Front Seat Position) on page 3-55 or Securing Child Restraints (Front Outboard Passenger Seat) on page 3-55 or Securing Child Restraints (Rear Seat) on page 3-64. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if your vehicle has one. Refer to the child restraint instructions and the following steps: 1.1. Fold the passenger seatback forward to access the top tether anchor. See Reclining Seatbacks on page 3-5. 1.2. Find the top tether anchor. 1.3. Remove the cover to expose the anchor. 1.4. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions: 3-51 If the position you are using has an adjustable head restraint and you are using a dual tether, route the tether around the head restraint. If the position you are using has an adjustable head restraint and you are using a single tether, raise the head restraint and route the tether under the head restraint and in between the head restraint posts.