2008 Chrysler Pacifica Owner Manual - Page 267

UNDERSTANDING YOUR INSTRUMENT PANEL 267 • While holding the recirculation button, turn the ignition switch to the "RUN" position. • Continue holding the recirculation button for 4 seconds, then release. The recirculation control is now programmed so that the recirculation mode will not reset to the outside air mode when the engine is restarted. The recirculation programming can be changed back by repeating this procedure. Rear Blower Operation To operate the rear fan, press the ЉREARЉ button. The first time this button is pressed the ЉREAR AUTOЉ display will illuminate indicating that the rear fan speed is automatically controlled. To manually control the rear fan speed, press the ЉREARЉ button again and only ЉREARЉ will illuminate in the display. This allows the rear seat occupants to control the rear fan speed using the switch located in the center console between the second row seats. By pressing the ЉREARЉ button a third time, the rear fan will shut off. When the ATC display reads ЉREAR AUTOЉ or when the rear fan is off, the switch located in the center console between the second row seats is not functional. When the ATC display reads ЉREARЉ, only the rear seat occupants can control the rear fan speed from the rear switch. When in the "REAR" mode, the rear occupants can set the rear switch to any fan speed including ЉOFFЉ, or ЉAUTOЉ. While in the ЉAUTOЉ position, the rear fan speed will be automatically controlled. Summer Operation The engine cooling system in air conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A 50% solution of ethylene 4