2012 Chrysler 300 Owner Manual - Page 483
2012 Chrysler 300 Manual
Page 483 highlights
MAINTAINING YOUR VEHICLE 481 Engine Oil Viscosity (SAE Grade) - 3.6L Engine NOTE: Vehicles equipped with a 5.7L engine must use SAE 5W-30 engine oil is recommended for all operating SAE 5W-20 oil. Failure to do so may result in improper temperatures. operation of the Multi-Displacement System (MDS). Refer to "Multi-Displacement System" in "Starting and The engine oil filler cap also shows the recommended engine Operating" for further information. oil viscosity for your engine. For information on engine oil filler cap location, refer to "Engine Compartment" in "Main- Lubricants that do not have both, the engine oil certifitaining Your Vehicle" for further information. cation mark and the correct SAE viscosity grade number Lubricants that do not have both, the engine oil certifi- should not be used. cation mark and the correct SAE viscosity grade number Synthetic Engine Oils should not be used. You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recomEngine Oil Viscosity (SAE Grade) - 5.7L Engine SAE 5W-20 engine oil is recommended for all operating mended maintenance intervals for oil and filter changes temperatures. This engine oil improves low temperature are followed. starting and vehicle fuel economy. Materials Added To Engine Oil The engine oil filler cap also shows the recommended engine Do not add any supplemental materials, other than leak oil viscosity for your engine. For information on engine oil detection dyes, to the engine oil. Engine oil is an engifiller cap location, refer to "Engine Compartment" in "Main- neered product and its performance may be impaired by supplemental additives. taining Your Vehicle" for further information. 7