2012 Chrysler 300 Owner Manual - Page 503
2012 Chrysler 300 Manual
Page 503 highlights
MAINTAINING YOUR VEHICLE 501 CAUTION! (Continued) • The fluid level is preset at the factory and it does not require adjustment under normal operating conditions. If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe damage to the transmission may occur. Your authorized dealer has the proper tools to adjust the fluid level accurately. All Wheel Drive (AWD) - If Equipped The all wheel drive system consists of a transfer case and front differential. The exterior surface of these components should be inspected for evidence of fluid leaks. Confirmed leaks should be repaired as soon as possible. The transfer case fluid fill/inspection plug is located in the middle of the rear housing. To inspect the transfer case fluid level, remove the fill/inspection plug. The fluid level should be even with the bottom of the hole. Use this plug to add fluid as required. Fluid And Filter Changes Refer to the "Maintenance Schedule" for the proper The front differential fill plug is located on the outer maintenance intervals. cover near the halfshaft attachment. To inspect the differIf the transmission is disassembled for any reason, the ential fluid level, remove the fill plug. The fluid level should be even with or slightly below the bottom of the fluid and filter should be changed. hole. Fluid Changes Refer to the "Maintenance Schedule" for the proper maintenance intervals. 7