2008 Dodge Nitro Owner Manual - Page 376

376 MAINTAINING YOUR VEHICLE Transfer Case Fluid Level Check The fluid level should be to the bottom edge of the fill hole (A) when the vehicle is in a level position. Drain First remove fill plug (B), then drain plug (C). Recommended tightening torque for drain and fill plugs is 15-25 ft.lbs. (20-34 N·m). CAUTION! When replacing plugs, do not overtighten. You could damage them and cause them to leak. Selection of Lubricant Use only manufacturer's recommended fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole.