2008 Dodge Ram 2500 Pickup Owner Manual - Page 148

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate Push the ON/OFF button to the ON position. In the instrument cluster, the word "CRUISE" illuminates when the system is on. To Set At A Desired Speed When the vehicle has reached the desired speed, press and release the SET button. Release the accelerator and the vehicle will operate at the selected speed. To Deactivate A soft tap on the brake pedal, normal braking, clutch pressure while slowing the vehicle, or pressing the CANCEL button will deactivate speed control without erasing the memory. Pushing the ON/OFF button to the OFF position or turning off the ignition erases the memory. WARNING! Leaving the Speed Control ON when not in use is dangerous. You could accidentally set the system to cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you aren't using it. To Resume Speed To resume a previously set speed, push and release the RESUME button. Resume can be used at any speed above 20 mph (32 km/h). To Vary The Speed Setting When the speed control is on, speed can be increased by pressing and holding the ACCEL button. When the button is released, a new set speed will be established.