2009 Dodge Grand Caravan Owner's Manual - Page 175

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 3. Press and release the memory SET (S) button located on the driver's door. A chime will sound signaling that you are in the memory set mode. 4. Within five seconds, press and release MEMORY button 1 on the driver's door. A chime will sound signaling to you that the driver memory has been set. 5. Within five seconds, press and release the UNLOCK button on the RKE transmitter. A chime will sound signaling to you that the RKE transmitter link has been successfully disabled. To disable another RKE transmitter linked to either Memory Position, repeat Steps 1 to 5 for each RKE transmitter. NOTE: Once programmed, all RKE transmitters linked to memory can be easily enabled or disabled at one time. Refer to the Remote Linked to Memory CustomerProgrammable Features in the Electronic Vehicle Information Center (EVIC) for more information. Easy Entry/Exit Seat (Available with Memory Seat ONLY) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch. • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal to 2.7 in (67.7 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. 3