2010 Dodge Charger Owner Manual - Page 147

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set At A Desired Speed Turn the Electronic Speed Control ON. When the vehicle reaches the speed desired, push the lever downward to SET DECEL and release. Remove your foot from the accelerator pedal and the vehicle will operate at the selected speed. NOTE: • Electronic Speed Control will only function in 3rd, 4th, or 5th gear when in the Autostick௡ mode (if equipped). • Press the brake pedal. • Pull the Electronic Speed Control lever toward you (CANCEL). Pushing and releasing the ON/OFF button or turning the ignition OFF erases the set speed from memory. To Resume Speed If you deactivated the Electronic Speed Control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. To do so, push the lever upward to • The Electronic Speed Control may not engage if a RESUME ACCEL and release. Then remove your foot different size tire is installed on one wheel, such as the from the accelerator pedal. compact spare tire. To Vary the Speed Setting To Deactivate When the Electronic Speed Control is set, you can inThe system will disable Electronic Speed Control without crease speed by pushing up and holding the RESUME erasing the memory if you: ACCEL lever. If the lever is continually held in the • Softly tap the brake pedal.