2010 Dodge Grand Caravan Cargo Owner Manual - Page 475

474 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Headlamps 5. Connect the wiring connector to bulb and slide red lock tab forward. Front Park/Turn Signal Lamps 1. Raise the hood to access the rear of the headlamp 1. Raise the hood to access the rear of the headlamp housing. housing. 2. Slide the red lock tab rearward on the connector, then depress the tab and remove the connector from the bulb. 2. Twist the turn signal socket and remove from the headlamp housing, then pull the bulb out. 3. Twist the headlamp bulb and pull the bulb from the 3. Push the new bulb into the socket and reinstall the headlamp housing. socket by twisting until locked into the headlamp 4. Install the new headlamp bulb and twist until locked housing. into the headlamp housing. Fog Lamps CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. NOTE: Access to the fog lamp bulb is from the rear of the fascia. On the left rear side of the fascia, remove the push pin and lower the hinged access door on the air dam.