2013 Dodge Durango Owner Manual - Page 337

UNDERSTANDING YOUR INSTRUMENT PANEL 335 check. If the light does not come on during starting, have chime will sound after reaching a set threshold. Further the system checked by an authorized dealer. overheating will cause the temperature gauge to pass H, the indicator will continuously flash and a continuous If a problem is detected, the light will come on while the chime will occur until the engine is allowed to cool. engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is If the light turns on while driving, safely pull over and placed in the PARK position. The light should turn off. stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the veIf the light remains lit with the engine running, your hicle. If the temperature reading does not return to vehicle will usually be drivable. However, see an authonormal, turn the engine off immediately and call for rized dealer for service as soon as possible. If the light is service. Refer to "If Your Engine Overheats" in "What To flashing when the engine is running, immediate service is Do In Emergencies" for more information. required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may • Transmission Temperature Warning Light require towing. This light indicates that there is excessive transmission fluid temperature that might occur • Engine Temperature Warning Light with severe usage such as trailer towing. It may This light warns of an overheated engine condialso occur when operating the vehicle in a high tion. As temperatures rise and the gauge aptorque converter slip condition, such as 4-wheel-drive proaches H, this indicator will illuminate and a single operation (e.g., snow plowing, off- road operation). If this 4