2013 Dodge Durango Owner Manual - Page 346

344 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Press and release the SELECT button to start the calibration. The "CAL" indicator will be displayed in If the compass appears erratic and the CAL indicator the EVIC. does not appear in the EVIC display, you must put the compass into the Calibration Mode manually, as follows: 5. Complete one or more 360-degree turns (in an area free from large metal or metallic objects) until the NOTE: For the most accurate compass performance, the "CAL" indicator turns off. The compass will now compass variance must be set before performing the function normally. manual compass calibration. The variance should be set Manual Compass Calibration for the zone where the vehicle is driven, per the zone Customer-Programmable Features (System map. For further information, refer to "Compass Vari- Setup) ance." Personal Settings allows you to set and recall features when the transmission is in PARK. If the transmission is 1. Turn ON the ignition switch. out of PARK or the vehicle begins moving, a warning 2. Press the UP or DOWN button until the Setup message SETUP NOT AVAILABLE, is followed in 3 (Customer-Programmable Features) menu is reached, seconds by, VEHICLE NOT IN PARK. then press the SELECT button. Press and release the UP or DOWN button until Setup 3. Press the DOWN button until "Calibrate Compass" is displays in the EVIC. displayed in the EVIC.