1997 Ford Windstar Owner Guide 1st Printing - Page 270
1997 Ford Windstar Manual
Page 270 highlights
The jack and handle assembly 7. Turn the lug nut wrench (attached to the jack handle) clockwise to raise the vehicle off the ground. 8. Remove the wheel lug nuts with the lug nut wrench. 9. Remove the flat tire and replace it with the spare tire. 10. Place the wheel lug nuts on the spare tire. Use the lug nut wrench to screw the lug nuts snug against the wheel, but do not tighten fully. 11. Lower the vehicle by turning the jack handle counterclockwise. 12. Use the wheel lug wrench to tighten lug nuts in the appropriate sequence. Re-check for complete tightness. 270
270
The jack and handle assembly
7.
Turn the lug nut wrench (attached to the jack handle)
clockwise to raise the vehicle off the ground.
8.
Remove the wheel lug nuts with the lug nut wrench.
9.
Remove the flat tire and replace it with the spare tire.
10.
Place the wheel lug nuts on the spare tire. Use the lug nut
wrench to screw the lug nuts snug against the wheel, but do
not tighten fully.
11.
Lower the vehicle by turning the jack handle
counterclockwise.
12.
Use the wheel lug wrench to tighten lug nuts in the
appropriate sequence. Re-check for complete tightness.